ZAP has executed over a 1,000 projects since 2001. Ensuring the success of your project is our primary objective.
This Greenfield compressor station in Lea County, NM receives rich natural gas from an existing gathering system at 40-60 psig and compress it to 1,050-1,300 using Six (6) leased compressor skids driven by Caterpillar G3608 A4 gas engines and dehydrated to 7 lbs/MMSCF.
ZAP completed the engineering, procurement, and construction to convert an existing gas processing plant to a compressor station with inlet liquid separation, amine treating, dehydration and water separation, and disposal.
Chemical Formulation Addition ZAP completed the engineering and design to allow a new formulation process to be produced at an existing chemical processing facility. New process chemical storage, including bulk formula storage and truck load out was included in design. ZAP also completed a 3D scan of the facility, which allowed the new design to […]
ZAP completed the mechanical and structural design for a compressor and condenser upgrade project at an Anhydrous Ammonia Terminal. The project included replacing existing water-cooled condensers with two Wet Surface Air Cooler Ammonia Condensers, which included a water treatment system for each unit.
Well Pad Gathering Projects ZAP completed work on pipelines from nine well pad sites that each required the install of an oil gathering, produced water, and freshwater pipeline lateral. Pipeline sizes included 12, 8, and 6 inch lengths, ranged from 500 LF to 7,000 LF. Scope included laying out launchers, receivers, valve sites, and tie-ins […]
Pipeline Launcher / Receiver Typicals ZAP provided engineering and design support in the development of new pipeline launcher/receiver details for various oil and gas pipeline laterals. A total of eight different launcher/receiver designs were developed for the gathering system. Deliverables included plan, section, and bill of materials drawings along with P&ID’s. ZAP also provided project […]
Hydraulic Modeling Synergi Water ZAP completed work on modeling an existing freshwater system utilizing Synergi Water. The model was built to match the existing conditions for use in running scenarios of the systems capabilities and identify locations to focus expansion.
ZAP completed the FEED study, engineering design, procurement management, and construction management of a 40,000 bbl/day oil stabilization facility in North Dakota.
ZAP completed the engineering design, procurement, and construction of the installation of two Solar Taurus 70 turbine booster compressors site, with a future option to install a third Solar Taurus 70 turbine booster compressor.
ZAP completed the engineering design, procurement, and construction of the installation of two Solar Taurus 70 turbine booster compressors, with a future option to install a third Solar Taurus 70 turbine booster compressor.
Each ROTF will consist of modular 30,000 BPD oil stabilization trains and a balance of plant infrastructure suitable for a full plant capacity of 120,000 BPD.
ZAP was retained in an engineering design, procurement, and construction (EPC) role for the installation of a greenfield compressor station in Weld County, Colorado.
60 MMSCFD Libby Gas Plant – Lea County, New Mexico ZAP Engineering & Construction Services, INC was contracted, by 3 Bear Energy LLC, to perform the engineering and design for a 60 MMSCFD cryogenic gas processing plant with 400 GPM amine unit, inlet liquids handling, stabilizer, and all utilities. The project included site development, in […]
EPC- 60 MMSCFD Cryo Gas Plant- Weld County, CO ZAP is contracted as the EPC contractor for the design, balance of plant procurement, and construction of a 60 MMSCFD Cryo Gas Plant in Weld County, CO. ZAP completed a preliminary construction estimate level engineering and design in order to define the project scope, schedule, […]
Excellence in Execution
ZAP is excited to announce the launch our expansion into the Eastern US with the addition of our East Coast Engineering office in Bethlehem, PA!
ZAP is excited to announce the launch our expansion into Houston, TX! We are thrilled to welcome Chris Combs who will assume the role of Vice President – Gulf Coast Engineering!